Page 2
Component List Picture Descrip on Part Leg Frame Leg Connector Hardware List Picture Descrip on Part Allen Bolt 12x6 mm Washer 16x6 mm Tool List Picture Descrip on Part Allen Key 4 mm Assembly Prep Before Beginning *Save all packing un l finished. *Read Instruc ons, cover to cover.
Page 3
Assembly Steps Step 1 Turn the Top (A) upside down on a padded non-damaging surface. Gently insert Leg Frame (B) into the hole of pre-fixed metal tube underneath the Top (A) as illustrated. Align the holes on the metal tube underneath the Top (A) with pre-threaded holes on the Leg Frame (B) and secure using Allen Bolt (H1) and Washer (H2) with the help of Allen Key (T1).
Page 4
Assembly Steps Step 3 Pre-fi ed levellers can be used for adjustment if needed Assembly is complete and the product is ready to use. Page 4...
Page 5
HARDLINE FURNITURE (NOT UPHOLSTERY) Safety Instructions Never drag furniture when moving it, always lift it. When lifting or moving a table always do so from under frame and not the table top. Periodically check all fixings to ensure none have come loose and re-tighten where necessary. Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Page 6
Extendable dining tables should be left extended for the first few months to avoid an uneven appearance. Likewise, lamps and ornaments should also be moved regularly. Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat sources such as radiators or fires.
Page 7
How to care for Metal furniture Metal furniture requires minimal maintenance: Cleaning your metal furniture is very simple. Use a soft cotton cloth and clean with mild detergent or water, using a towel immediately dry the furniture afterwards. Metal furniture is usually damaged due to rust, as a precaution a soft wax after cleaning will help seal it.
Need help?
Do you have a question about the Monique 5059413403835 and is the answer not in the manual?
Questions and answers