Page 1
ASSEMBLY & PRODUCT CARE 2 DRAWER DESK 1300 x 525 x 770 5059413395932 / 5059413395949 Thank you for purchasing this PRODUCT. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product...
Page 2
Fittings and parts checklist Item Description Item Description Item Description Top table Wrench Key Flat washer Spring washer...
Page 3
Step by step assembly instructions Step one Place top table (1) upside down on the clean carpet or blanket to avoid damage to the surface Step two Attach the legs (2) by inserting the leg bolt into the hole provided on the corner wooden frame.Attach flat washer (C), spring washer (D) then nuts (A) and tighten using wrench key (B).
Page 4
Step three Carefully stand product to upright position. FINISH IMPORTANT: WHEN LIFTING OR MOVING THE TABLE ALWAYS DO SO FROM THE UNDER FRAME AND NOT THE TABLE TOP Step Four Secure the desk to the wall using the anti-topple kit provided, following the instructions detailed below.
Page 5
Safety Instructions Never drag furniture when moving it, always lift it. When lifting or moving a table always do so from under frame and not the table top. Periodically check all fixings to ensure none have come loose and re-tighten where necessary. Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Page 6
AVOID chemical cleaners or liquid furniture polish including direct contact with greasy substances As with all natural wood products, there will be some movement within the parts as the furniture acclimatises to its surroundings, you may see slight chipping and cracks where panels meet, this is a completely natural occurrence with ALL painted products using natural solid timbers.
Need help?
Do you have a question about the 5059413395932 and is the answer not in the manual?
Questions and answers