Attaching The Vertical Battery Grip - FujiFilm X-H2S Owner's Manual

Attaching the Vertical Battery Grip

N •
Check that the camera is off before attaching or removing the vertical
battery grip.
•
The camera fi le transmitter/vertical battery grip connector cover (A)
can be stored in the grip connector cover compartment. Keep the
grip contact cap (B) in a safe place when not in use.
O •
Fully tighten the lock screw knob after attaching the grip.
•
Do not touch the contacts.
•
After removing the grip, replace the fi le transmitter/vertical battery
grip connector cover (A) and contact cap (B).
•
The grip is not waterproof, and caution is required to prevent the en-
try of dirt, dust, water, noxious gases, salt, and other foreign matter.
Do not place the grip on wet surfaces. Before use, be sure that the
battery tray and battery-chamber cover are fully closed.
11
328
(A)
(B)