Getting Started; Important Safety Information - HP Z34c G3 Maintenance And Service Manual

1. Getting started

Read this chapter to learn about safety information and where to find additional HP
resources.

Important safety information

Carefully read the cautions and notes within this document to minimize the risk of
personal injury to service personnel. The cautions and notes are not exhaustive. Proper
service methods are important to the safe, reliable operation of equipment. Improper
service methods can damage equipment.
The service procedures recommended and described in this service manual provide
effective methods of performing service operations. Service engineers should have prior
repair knowledge and experience as well as appropriate training for the product before
performing service procedures.
Be sure your working environment is dry and clean and meets all government
●
safety requirements.
Be sure that other persons are safe while you are servicing the product.
●
Do not perform any action that can cause a hazard to the customer or make the
●
product unsafe.
Use proper safety devices to ensure your personal safety.
●
Always use approved tools and test equipment for servicing.
●
Never assume the product's power is disconnected from the main power supply.
●
Check that it is disconnected before opening the product's cabinet.
Modules containing electrical components are sensitive to electrostatic discharge
●
(ESD). Follow ESD safety procedures while handling these parts.
Some products contain more than one battery. Do not disassemble or expose a
●
battery to high temperatures, such as throwing into fire, or the battery may
explode.
Refer to government requirements for battery recycling or disposal.
●
This information provides general service information for the monitor. Adherence
to the procedures and precautions is essential for proper service.
IMPORTANT:
should perform service or maintenance for it. Before performing any service or
maintenance, personnel must read the important safety information.
IMPORTANT:
opening the monitor to prevent component damage.
2
Only trained service personnel who are familiar with this HP product
You must disconnect the power cord from the power source before