Subframe Critical Dimensions - Efco swaploader SL-105 Parts And Operation Manual

LIFT BAR DETAIL
NOTE:
1.
A STRUCTURAL JIB CONTACT POINT LOCATED AS LOW AS ALLOWABLE ON THE CONTAINER FRONT IS REQUIRED.
2.
WELD HOOK GUARD TO BODY OR ADD STRUCTURAL SUPPORT AS NEEDED FOR THE APPLICATION.
3.
THIS DRAWING PROVIDES THE CRITICAL SUB-FRAME DIMENSIONS FOR COMPATABILITY WITH THE SWAPLOADER
HOOK LIFT HOIST. IT IS THE SUB-FRAME SUPPLIER'S RESPONSIBILITY TO PROVIDE A SUB-FRAME OF SUFFICIENT
CAPACITY WHICH PROPERLY SUPPORTS THE BODY/CONTAINER WHEN USED WITH THE HOOK LIFT HOIST.
4.
SWAPLOADER MANUFACTURED 100 SERIES A-FRAMES REQUIRE A 5 INCH LONGSILL HEIGHT.
2.0.INS.SL-105
100 SERIES SUB-FRAME CRITICAL DIMENSIONS
100 SERIES SUB-FRAME DIMENSIONS
HOIST COMPATABILITY
SL-75/95/105
SL-125/145/180/185/212/214
Section II: Installation
A
82 1/2" [2096 mm]
95 1/2" [2418 mm]
2-15