Advertisement
2019/01/30 02:46:26 (GMT+09:00)
1-8. FFC REPLACEMENT CAUTION
< Application >
< Connector location >
< Method >
< Caution >
Initial condition
Push the side-release lock buttons inward (highlighted
1
in red).
Pull-out FFC in straight direction while pushing side-
2
release lock buttons at the same time.
Withdrawal of FFC using Non-ZIF (Molex connector)
Main board side
See as follows
See as follows
Step 1 & 2
PUSH
1
PUSH
1
2
PULL
Note: FFC as in image is only for reference purpose. Actual FFC
outlook may vary by each vendor.
Caution
Ensure fingers does NOT touch
parts on board and tuner connector
when pushing the side locks.
15
SYS SET
Advertisement
