Advertisement
2019/01/30 02:46:26 (GMT+09:00)
4.14 ATMOS CEC Disable
1) Go to "ATMOS CEC DISABLE" and Press "<" or ">" button to select '0' or 'A'
2) After select the option that you wish, press "Home" to confirm the selection.
ATMOS_CEC_DISABLE (EEPROM 0x30A0)
Data : [0/A] Default : 0
Purpose : Data [A] is able to skip Atmos judgment by CEC
<Report Short Audio Descriptor> comes from the amplifier,
and to set Atmos EDID as the service c/m to an amplifier
that supports Atmos but it reply NO Atmos.
Remarks :
1) This data is not changed by software update or AC-Off-
On, only change from service menu.
2) Need to turn AC off/on after change setting in order
algorithm to take effect.
Option
The TV checks whether HDMI1(ARC)
is connected to an amplifier that
0 (default)
support ARC & Atmos or not, and sets
either Atmos EDID/ Non Atmos EDID.
The TV skip Atmos checking when
HDMI1(ARC) is connected to an
A
amplifier that support ARC and set
Atmos EDID even when amplifier
doesn't support Atmos.
Execution Effect
143
SYS SET
Advertisement
