How To Initialize The Lcd Tv - Philips PL22.06 Service Manual

HOW TO INITIALIZE THE LCD TV

The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to
select a language and program channels after the set has been initialized.
To put the program back at the factory-default, initialize the LCD TV using the following procedure.
Note: Disconnect any device from the USB Port
before you conduct on this procedure.
1. Turn the power on.
2. Press [ (HOME)] button on the remote control
unit.
3. Enter the service mode.
4. Press [INFO] button on the remote control unit to
proceed with the self check mode.
5. Make sure to confirm the "INITIALIZED: OK"
appears in the green screen.
Note:It will take long time. (around 1 minutes 30
seconds)
6. Unplug the AC Cord and plug it back on again.
7. Make sure to confirm the TV boot to Live TV.
8. Press [ (HOME)] button.
9. Press [OPTIONS] button display Settings side
menu.
10. Select "Device Preferences" by CURSOR buttons
and press [OK] button.
11. Select "Reset" by CURSOR buttons and press
[OK] button.
12. Select "Reset" by CURSOR buttons and press
[OK] button.
13. Select "Erase everything" by CURSOR buttons
and press [OK] button to perfom initializaiton.
14. Make sure to confirm the Initial settings menu
appears.
Note:It will take long time. (around 1 minutes 30
seconds)
15. Unplug the AC Cord and plug it back on again.
6-1 PL22.06INT