ZyXEL Communications GS1100 Series User Manual page 27

Table 6 LED Descriptions: GS1100-10HP (continued)
LED COLOR STATUS
PoE MAX Amber On
Off
PoE 10/100/1000Base-T Ports
Link/ACT Green On
(Left)
Blinking
Off
Amber On
Blinking
Off
PoE Green On
Mode
Off
(Right)
Amber On
Off
SFP Green On
Blinking
Off
Amber On
Blinking
Off
Table 7 LED Descriptions: GS1100-16/24/24E
LED COLOR STATUS
PWR Green On
Off
LINK/ACT Green On
Blinking
Amber On
Blinking
Off
Uplink Green On
Port LED
Blinking
(SFP)
Amber On
Blinking
Off
Chapter 3 Hardware Panels
DESCRIPTION
Power supplied to the PoE port(s) has reached ninety-five percent of the
power budget limit or has exceeded the total PoE power budget on the
Switch.
Power supplied to the PoE port(s) is below the power budget limit.
The link to a 1 Gbps Ethernet network is up.
The Switch is transmitting or receiving to/from a1 Gbps Ethernet network.
The port is not connected to an Ethernet network.
The link to a 10 Mbps or a 100 Mbps Ethernet network is up.
The Switch is transmitting or receiving to/from a 10 Mbps or a 100 Mbps
Ethernet network.
The link to an Ethernet network is down.
Power supplied to all PoE Ethernet ports meets the IEEE 802.3at standard
There is no power supplied.
Power supplied to all PoE Ethernet ports meets the IEEE 802.3af standard.
There is no power supplied.
The uplink port is linking at 1000 Mbps.
The port is receiving or transmitting data at 1000 Mbps.
There is no link or port, or the uplink port is shut down.
The uplink port is linking at 100 Mbps.
The port is receiving or transmitting data at 100 Mbps.
There is no link or port, or the uplink port is shut down.
DESCRIPTION
The Switch is receiving power from the power module in the power slot.
The Switch is not receiving power from the power module in the power slot.
The link to a 1000 Mbps Ethernet network is up.
The Switch is transmitting/receiving to/from a 1000 Mbps Ethernet network.
The link to a 10 Mbps or a 100 Mbps Ethernet network is up.
The Switch is transmitting/receiving to/from a 10 Mbps or a 100 Mbps
Ethernet network.
The port is not connected to an Ethernet network or the Switch is shut down.
The port is connected to an Ethernet network at 1000 Mbps.
The port is receiving or transmitting data at 1000 Mbps.
The link to a 100 Mbps Ethernet network is up.
The port is receiving or transmitting data at 100 Mbps.
The port is not connected to an Ethernet network or the Switch is shut down.
GS1100 Series User's Guide
27