Line-In Jack; Package Contents - Champion AST100 User Manual

Pairing the speaker with a Bluetooth enabled device
1. Plug the speaker into a power source.
2. Turn ON the speaker by long pressing the button on the top of the speaker.
3. Press the button on the speaker until the speaker is in Bluetooth mode and the
4. Keep the speaker and Bluetooth enabled device within 3 feet of each other during the
pairing process.
5. Set your mobile phone or other Bluetooth enabled device to search for Bluetooth devices.
of found devices.
7. After a successful pairing , the Bluetooth Indicator light will stop blinking.
Line in jack
1. Connect one end of the cable to the AUX jack. Connect the other end of the cable to an
Mp3 player or other audio source.
2. Press the power button to turn the unit on.
3. Press the [mode] button on the speaker to switch to Line In mode.
4. Begin playing on the connected unit.

Package Contents

Please check that the following accessories are enclosed in the package:
Screws
Adapter
Remote control
Base
Main part
Manual
Audio Cable
Assembly
1. After all the screws are screwed in, tighten them evenly
clockwise to avoid misplacement of the stand and the base plate.
2. When the screw is screwed in, tighten evenly clockwise.
Do not force excessively in case of irreparable damage to the
speaker cabinet.