Super Pattern (Triple Sewing) - Baby Lock BL-6800 Service Manual

19.

SUPER PATTERN (TRIPLE SEWING)

STANDARD
Be particularly careful, the pattern will break down unless the super pattern stitch length forward and reverse
lengths are correctly adjusted.
ADJUSTMENT
1. Turn the selection dial to zigzag sewing, turn the Zigzag dial to the maximum, and set the feed dial to SS
position.
2. Loosen the feed regulator nut.
3. Turn the adjustment screw to adjust the length of the forward and reverse stitches.
4. Tighten the feed adjuster nut.
Adjustment Points
3. Turning the adjustment screw to the right increases the reverse stitch length; turning it to the left increases
the forward stitch length.
4. When fastening the adjustment screw with the nut, in order to maintain the position and prevent deviation,
hold the adjustment screw with the driver while you tighten down the nut.
* When adjusting the SUPER PATTERN, check the 20. FEED ADJUSTMENT and 21. BUTTON HOLE
STITCH LEFT REVERSE STITCH AND RIGHT FORWARD STITCH LENGTH ADJUSTMENT and adjust
them if necessary.
Feed regulator nut
-50-