Baby Lock BL-6800 Service Manual page 24

64. Hang the feed base tension spring.
65. Install the camber prevention plate with the two screws.
66. Put the inner rotary hook in place and install the inner rotary hook left retainer plate with the screw.
(See Adjustment Procedure 9.)
67. Install the inner rotary hook rotation prevention bracket with the screw. (See Adjustment Procedure 10.)
68. Install the needle plate assembly with the screw and check the feed teeth left-right position.
(See Adjustment Procedure 11.)
Assembly Point
67. Screw the inner rotary hook rotation prevention bracket screw (C) into screw hole (B), not (A). If you
screw it into (A), it will not be possible to install the needle plate assembly correctly.
-22-