Polaris SCRAMBLER XP 1000 S 2020 Owner's Manual For Maintenance And Safety page 93

LUBRICATION GUIDE
Check and lubricate all components at the intervals outlined in the Periodic
Maintenance Chart. Items not listed in the chart should be lubricated at the
General Lubrication interval.
The a-arms and upper control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
ITEM
Engine Oil
Transmission
Oil
Demand
Drive Fluid
(Front
Gearcase)
Rear
Gearcase Oil
Brake Fluid
Front Prop
Shaft Yoke
A-Arms,
Front and
Rear
Downloaded from ManualsNet.com
RECOM- CAPACITY
MENDED AT FLUID
LUBRICANT CHANGE
PS-4 5W-50 2 qt.
4-Cycle Oil (1.9 l)
AGL 37 oz.
Gearcase
(1100 ml)
Lubricant &
Transmission
Fluid
Demand 9.3 oz. (275
Drive Fluid ml)
ATV Angle 7.1 oz. (210
Drive Fluid ml)
(or GL5 80-
90 weight
gear lube)
DOT 4 Brake —
Fluid
U-Joint Grease fittings (3 pumps maximum) every 500 miles, before long
Grease periods of storage, or after pressure washing or submerging.
POLARIS All- Grease fittings after extreme use or if suspension becomes
Season
Grease
search engine
MAINTENANCE
FILL PLUG DRAIN
TORQUE PLUG
TORQUE
— 12 ft-lbs
(16 Nm)
10-14 ft-lbs 10-14 ft-lbs
(14-19 Nm) (14-19 Nm)
8-10 ft-lbs 11 ft-lbs
(11-14 Nm) (15 Nm)
10-14 ft-lbs 10-14 ft-lbs
(14-19 Nm) (14-19 Nm)
— —
squeaky.
SEE PAGE
page 92
page 95
page 96
page 97
page 33
91