Polaris SCRAMBLER XP 1000 S 2020 Owner's Manual For Maintenance And Safety page 40

FEATURES AND CONTROLS
INDICATOR LAMPS
q
Check Engine
w
EPS Warning (if
equipped)
e
Engine Hot
r
Neutral
t
Helmet/Seat Belt
y
High Beam
u
Chassis Fault
i
Performance
Limited
38
Downloaded from ManualsNet.com
This indicator appears if an EFI-related fault occurs. Do not
operate the vehicle if this warning appears. Serious engine
damage could result. Your authorized POLARIS dealer can
assist.
This indicator illuminates when a fault has occurred in the
EPS system. Your authorized POLARIS dealer can assist.
EPS operation is possible with key on/engine off for up to 5
minutes.
This lamp illuminates to indicate an overheated engine. If the
indicator flashes, a severe overheating condition exists.
This lamp illuminates when the transmission is in neutral and
the ignition key is in the ON position.
This lamp flashes for several seconds when the key is turned
to the ON position. The lamp is a reminder to wear helmet and
seat belt (if equipped) before operating.
This lamp illuminates when the headlamp switch is set to high
beam.
If applicable.
On models equipped with a low speed limiter, indicator light
will remain on when low speed limiter is active.
search engine