Polaris SCRAMBLER XP 1000 S 2020 Owner's Manual For Maintenance And Safety page 31

4X4 SWITCH (IF EQUIPPED)
The drive mode switch
All Wheel Drive (AWD/4X4) system.
Use this switch to engage AWD (4X4)
or 2X4. The vehicle automatically
engages 4X4 when operating in reverse
if the drive mode is set to AWD (4X4).
See page 36 for drive mode (AWD)
operating instructions.
THROTTLE LEVER
Operating an ATV with sticking or improperly operating throttle controls could
cause an accident. Never start or operate an ATV that has a sticking or
improperly operating throttle. Immediately contact your POLARIS dealer or
Failure to check or maintain proper operation of the throttle system can result
in an accident if the throttle lever sticks during operation. Always check the
lever for free movement and return before starting the engine. Also check
Modifications to the electronic throttle control could result in failure to perform
as designed, which could result in an accident. Do not attempt to modify the
throttle control system or replace it with any after market throttle mechanisms.
Engine speed and vehicle movement
are controlled by pressing the throttle
y
lever
. The throttle lever is spring
loaded. Engine speed returns to idle
when the lever is released. This ATV is
equipped with a throttle release switch,
which is designed to reduce the risk of a
frozen or stuck throttle.
Downloaded from ManualsNet.com
t
controls the
other qualified person for service if throttle problems arise.
occasionally during operation.
search engine
FEATURES AND CONTROLS
WARNING
29