Sunlighten Amplify II Assembly Instructions Manual

Sunlighten Amplify II Assembly Instructions Manual

Hide thumbs Also See for Amplify II:

Advertisement

Quick Links

UK ASSEMBLY INSTRUCTIONS
1
2
3
2x
5x
7
8
9
12x
12x
A
B
5x
1x
F
1x
Back Wall
J
1x
Bench
1
sunlighten.com/gb-en
Amplify II
4
5
4x
4x
8x
10
11
12x
12x
2x
C
1x
G
1x
Right Wall
K
2x
Full Spectrum (FS) Heater
6
12x
12
1x
Allen wrench
D
1x
Roof
H
1x
Front Wall with glass panel
L
2x
FS Heater Covers
E
1x
Floor
I
1x
Left Wall
M
2x
FS Heater Top Panel
N
4x
FS Heater brackets

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Amplify II and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sunlighten Amplify II

  • Page 1 UK ASSEMBLY INSTRUCTIONS Amplify II Allen wrench Roof Floor Right Wall Left Wall Front Wall with glass panel Back Wall Bench Full Spectrum (FS) Heater FS Heater Covers FS Heater Top Panel FS Heater brackets sunlighten.com/gb-en...
  • Page 2 STEP 2 Place the back wall on the back of the floor panel Be sure you have two people assisting with this step. This is the side with the sauna information label on the bottom edge. sunlighten.com/gb-en...
  • Page 3 As you insert each wall segment, you will insert the U-clips in the pre-drilled holes in the corner This will keep the walls sealed together. The front wall will be inserted next. Be careful of the glass door and panel as you insert the wall. sunlighten.com/gb-en...
  • Page 4 STEP 6 Once all the U-clips have been inserted in the corners, the next step will be to place the roof on top. Make sure the side with the main power cord receptacle faces the back. sunlighten.com/gb-en...
  • Page 5 The door handles come with the hardware and can easily be screwed right in. A second person should hold the handle while the other screws the bolts in with the Allen wrench. The dust cover should also be replaced. heater frame sunlighten.com/gb-en...
  • Page 6 Repeat Steps 9-11 for the second FS Heater on front left inside corner sauna walls. sunlighten.com/gb-en...
  • Page 7 floor panel STEP 13 STEP 14 Add FS heater top panel to both FS heaters. Insert into pre-drilled holes on walls for the FS heater top panel Screw into pre-drilled holes to secure brackets. sunlighten.com/gb-en...
  • Page 8 STEP 15 Make sure that screws and washers are fully secure in their pre-drilled holes using a Phillips screwdriver. CONGRATULATIONS, your sauna is now ready to enjoy! If you have any questions, please call Sunlighten Customer Support at 0330.808.1203. sunlighten.com/gb-en...

Table of Contents