Table of Contents
Advertisement
WX-850BT/900BT/900BTM
BLUETOOTH FUNCTION CHECKING METHOD USING
A SMARTPHONE OR CELLULAR PHONE
1. Required Equipment
•
This unit to be tested, external microphone of attachment
•
Bluetooth compatible smartphone or cellular phone
•
Bluetooth audio devices (SONY NWZ-A826, or select from
connectable smartphone, cellular phones or audio devices list)
•
Speaker connection (at least Front L/R ch)
•
DC power supply (12 V)
2. Preparation
•
Confi rm the setting of this unit and note down it.
•
Press the [
CALL] button and rotate the control dial until
"SET PAIRING" appears, then press it, confi rm that the Blue-
tooth signal icon ( ) is fl ashing.
•
Turn on the Bluetooth function of the smartphone or cellular
phone.
3. Test Environment
•
No other Bluetooth device is making a communication in the
periphery (within 20 m).
•
No other this unit are supplied with electric power.
•
There are no two or more wireless LAN access points in the
periphery (with 50 m) (one is OK).
•
The set should be tested in a place such as a meeting room, free
from ambient noise.
•
The speaker at the far end should be in a place such as another
meeting room separated acoustically.
4. Setting
Install this unit on the desktop.
Approx. 50 cm
Speaker
5. Precautions
Beware of the following points when conducting the
talking test:
•
There is no fault if a talking can be made by adjusting ap-
propriately the volume of the telephone of the other party and
the smartphone or cellular phone connected through the Blue-
tooth, besides the setup of this unit.
•
The speaker's voice will become loud naturally if the periph-
ery is noisy, or become low if quiet (even though the speaker
intents to talk on the same volume level).
•
The speaker's voice will become loud naturally if the other
party's voice is loud.
8
Unit
Approx. 80 cm
Tester
6. Bluetooth Phone (Hands Free) Function Check
1. Search for this unit from the Bluetooth device (smartphone or
cellular phone), and confi rm whether this unit (model name) is
displayed.
2. Search for the distance of this unit and the Bluetooth device
(smartphone or cellular phone) about 5 m apart.
Confi rm whether the this unit is displayed after it searches.
3. Do the pairing of the smartphone or cellular phone and this
unit.
(If the input of the passkey is required, to enter the "0000")
4. Connect the smartphone or cellular phone with this unit, and
confi rm the "HF" icon ( ) is lights.
5. Confi rm the connection continues even if the distance of the
smartphone or cellular phone and this unit is separated by
about 5 m.
6. Set this unit except the "BT PHONE" source, and call the
smartphone or cellular phone connected with this unit.
Confi rm the automatic change of this unit into "BT PHONE"
source, and the change into the screen for incoming calls.
Confi rm the ring tone is heard from the front speaker.
7. Take a phone call (press the [
conversation.
Confi rm the other person voice is heard from the speaker.
Speak toward an external microphone at the following condi-
tion, and confi rm the other party hears its voice (An external
microphone is connected).
Compare the sound quality with a normal set. Confi rm that
there is no big difference.
8. Turn on ACC from off, and confi rm whether this unit connects
Bluetooth with the smartphone or cellular phone again.
Note: Depending on the smartphone or cellular phone, it might not recon-
nect automatically when ACC is turned on.
7. Bluetooth Audio Function Check
Note 1: Depending on the connecting BT Audio device, track information
(e.g. track name, playback time) can be on display.
If the device doesn't support AVRCP1.3, or, if AVRCP1.3 feature
of the device has not been validated with this unit, the track infor-
mation won't be shown.
Even if there is no track information on display during playback
of an AVRCP1.3 device, it is not a failure of this unit.
1. Connect the Bluetooth audio device (or smartphone, cellular
phone with Bluetooth audio function) with this unit, and con-
fi rm the "Audio Streaming" icon ( ) is lights.
2. Playback the Bluetooth audio. Confi rm the sound is emitted
from this unit when this unit is switched to "BT AUDIO"
source.
3. Confi rm whether Bluetooth audio can be controlled by oper-
ating this unit (the [
M >
[PAUSE 6] buttons operation).
Note 2: Varies depending on the connected Bluetooth audio device.
8. What to Do after Checking
•
After checking, this unit to execute initialization (refer to "IM-
PORTANT NOTE OF INITIALIZING" on page 15).
(Connected device information is deleted)
CALL] button), and start a
SEEK+], [SEEK–
] and
. m
Advertisement
Table of Contents
