Warranty And Liability; Environmental Protection, Disposal - Fein Slugger JMU 404 M Manual

Hide thumbs Also See for Slugger JMU 404 M:
Table of Contents

Advertisement

Available languages

Available languages

en
30
Service.
Have maintenance carried
WARNING
out only through qualified
personnel. Incorrectly mounted cables and
components can cause serious injuries.
Have the required service carried out only
through an authorized Slugger repair facility.
When replacing the power
CAUTION
tool's protective cable bush-
ing or cord between the drill stand and drill
motor is required, this must be carried out
by Slugger or by an authorized Slugger Ser-
vice Agent, in order to avoid hazardous sit-
uations.
Use only original spare parts.
The current spare parts list for this power
tool can be found in the Internet at
www.fein.com.
Cleaning.
Prior to any cleaning or main-
WARNING
tenance, disconnect the
power tool from the power supply in order to
avoid accidents.

Warranty and liability.

The warranty for the product is valid in accordance with the legal regulations in the country
where it is marketed.

Environmental protection, disposal.

Sort scrapped power tools and accessories for environmental-friendly recycling. For further
information, please contact your specialist shop.
When using in environments
WARNING
with conductive dust in the
air, such as when working metals, this dust
can settle in the interior of the power tool.
Therefore, regularly blow out the interior of
the power tool from outside via the ventila-
tion openings with dry, oil-free compressed
air; always wear eye protection when doing
this.
Do not attempt to clean
CAUTION
clogged or dirty ventilation
openings of the power tool with pointed
metal objects; use nonmetal tools or objects
if necessary.
Do not use cleaning agents
CAUTION
and solvents that can cause
damage to plastic parts. These include: Gas-
oline, carbon tetrachloride, chloric solvents,
ammonia and domestic cleaning agents that
contain ammonia.
Renew stickers and warning indications on
the power tool when aged and worn.
Cooling-lubricant system.
Flush the cooling-lubricant system with
water, clean and drain it completely when
not using the machine for periods longer
than two weeks.

Advertisement

Table of Contents
loading

Table of Contents