Table of Contents
Advertisement
Accessing the NVR
To turn on the power, connect the supplied Power Cord to the power outlet and turn on the Power
Switch.
After hearing 1 beeps from the NVR, you can start operating. The power LED indicators will indicate operation
status of the HDDs, power, and network. To turn off the power, press the Power Switch on the front panel for a few
seconds before unpluggingthe Power Cord.
You can look up the IP address and access the Web interface of the NVR using the IP Utility
(IPU)program, which can be downloaded from EverFocus' Website:
http://www.everfocus.com/
1. Save IP Utility Setup AutoRun.exe
followthe on ‐screen instructions. Check Run IPUtility.exe and click the Finish button, the IP
Utility willbe launched to search the IP devices connected in the same LAN automatically.
2. To optionally configure the Machine Name, IP Address, IP Type or Port Number using the IPU:
a. Log in the NVR by checking the desired model and then click the Log in
in dialog box appears.
NVR8008X Enterprise Rack Mount NVR
in your computer. Double click the .exe file and
10
icon. The Log
Advertisement
Table of Contents
