Related Manuals for JWA EDGAR 68432
Summary of Contents for JWA EDGAR 68432
- Page 1 ASSEMBLY INSTRUCTION EDGAR DESK ITEM CODE 68432 Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
-
Page 2: Pre-Assembly Preparation
PRE-ASSEMBLY PREPARATION Before you start: 1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2.Take care when lifting. Product should be assembled as near as possible to the point of 3.Ensure that you have all required contents for complete assembly 4.Always read the assembly instructions carefully before beginning assembly. -
Page 3: Parts List
PARTS LIST Panel Metal frame Top panel Support pipe... - Page 5 STEP 1: Load the fitting F into the metal frame P1. STEP 2: Connect and fix panel 2 and panel 3 with part A.
- Page 6 STEP 3: Fix panel 2 and panel 3 on metal frame P1 with fitting E. STEP4: Fix the support pipe P2 on the metal frame P1 with fitting C.
- Page 7 STEP 5: 1)Fix panel 1 on panel 2 with fitting D; 2)Fix panel 1 on the support pipe P2 with fitting B. STEP 5: Install a fall prevente.
- Page 8 ASSEMBLY IS COMPLETE...
- Page 9 SAFETY BRACKETS INSTRUCTIONS 1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach the Mounting Plate into a stud. If mounting into brick or masonry you will need to acquire wall anchors. 2. Attach the second Mounting Plate to the furniture frame with the Short Screws.
- Page 10 To protect your furniture, we suggest the following: • Avoid placing your furniture in direct sunlight. • Do not place furniture directly under windows. • Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp material may scrape and damage the finish.
Need help?
Do you have a question about the EDGAR 68432 and is the answer not in the manual?
Questions and answers