Page 1
ASSEMBLY INSTRUCTION EDGAR Bookcase ITEM CODE 68431 Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
PRE-ASSEMBLY PREPARATION Before you start: 1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2.Take care when lifting. Product should be assembled as near as possible to the point of 3.Ensure that you have all required contents for complete assembly 4.Always read the assembly instructions carefully before beginning assembly.
PARTS LIST Panel 1 Panel 5 Metal frame Panel 2 Back connection pipe Panel 3 Panel 4...
Page 4
STEP 1: Connect the metal pipes of P2 with fittings B2 and C. STEP 2: Install the accessory E at the bottom of the P1 metal frame.
Page 5
STEP 3: Fix 1, 2 and 3 panels on the P1 metal frame with part A. STEP4: Fix panel 4 and panel 5 on the metal frame of P1 with part A. The fitting A at the back of panel 5 should be connected with the fitting H.
Page 6
STEP 5: Use fitting B1 and D to fix P2 on the metal frame of P1. STEP 6: Use fitting F to pass through the fitting H and lock it into the wall rubber plug on the corresponding wall.
Page 8
SAFETY BRACKETS INSTRUCTIONS 1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach the Mounting Plate into a stud. If mounting into brick or masonry you will need to acquire wall anchors. 2. Attach the second Mounting Plate to the furniture frame with the Short Screws.
Page 9
To protect your furniture, we suggest the following: • Avoid placing your furniture in direct sunlight. • Do not place furniture directly under windows. • Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp material may scrape and damage the finish.
Need help?
Do you have a question about the Edgar 68431 and is the answer not in the manual?
Questions and answers