Subscribe to Our Youtube Channel
Related Manuals for JWA ELDA
Summary of Contents for JWA ELDA
- Page 1 ASSEMBLY INSTRUCTION ELDA DESK ITEM CODE 68440 Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
-
Page 2: Pre-Assembly Preparation
PRE-ASSEMBLY PREPARATION Before you start: 1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2.Take care when lifting. Product should be assembled as near as possible to the point of 3.Ensure that you have all required contents for complete assembly 4.Always read the assembly instructions carefully before beginning assembly. -
Page 3: Parts List
PARTS LIST Desktop panel Left main frame Panel support frame Layer panel Right main frame Back support pipe Right back main frame Connection pipe... - Page 4 STEP 1: Install fitting G at the bottom of metal frame P1, P2 and P3. STEP 2: Use fitting B to fix panel 2 on the metal frame of P2 and P3. Fix the metal pipe P4 on the metal frame P2 and P3 with fitting A2.
- Page 5 STEP 3: Use fitting B to fix panel 2 on the metal frame of P2 and P3; Fix the metal pipe P4 on the metal frame P2 and P3 with fitting STEP4: 1) Use parts A1, A2, F and E to fix the metal frame P5 on the metal frame P2 and P3;...
- Page 6 STEP 5: 1) Connect the metal pipes P6 with fitting C and D; 2) Fix the metal pipe P6 on the metal frame P1 and P3 with the fitting A3. STEP 6: Fix panel 1 with fitting A2 through metal frame P5.
- Page 7 STEP 7: Fix the metal pipe P4 on the metal frame P2 and P3 with fitting STEP 8: 1) fix the metal pipe P4 on the metal frame P2 and P3 with fitting A2; 2) fix panel 2 on the metal frame P2 and P3 with fitting B. 3)Lock P3 with part B, then lock the anti-fall device to the wall.
- Page 8 ASSEMBLY IS COMPLETE...
- Page 9 SAFETY BRACKETS INSTRUCTIONS 1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach the Mounting Plate into a stud. If mounting into brick or masonry you will need to acquire wall anchors. 2. Attach the second Mounting Plate to the furniture frame with the Short Screws.
- Page 10 To protect your furniture, we suggest the following: • Avoid placing your furniture in direct sunlight. • Do not place furniture directly under windows. • Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp material may scrape and damage the finish.
Need help?
Do you have a question about the ELDA and is the answer not in the manual?
Questions and answers