AGFA Drystar Kiosk 5370/100 Operator's Manual page 60

60 | Drystar Kiosk Operator Manual | Operation
4. Gently remove the film sheet(s).
5. If the film jam has been cleared, close the printer. You can resume work.
0401B EN 20211008 1002
WARNING:
The print head unit can be warm.
Note: Never use force to clear the jammed film. If it is not
possible to gently remove the jammed film by pressing the
transport buttons, proceed with the procedure as follows.
Note: Verify that no film sheets remain in the print head
compartment.