Filling The Tray Of The Film Printer - AGFA Drystar Kiosk 5370/100 Operator's Manual

Filling the tray of the film printer

Topics:
• Opening the bottom door
• Film loading procedure
• Checking the correct position of a film in the input tray
• Closing the bottom door
• Update the film count
Note: If the tray is not empty yet, count the number of remaining
film sheets before loading the new film pack. This number must
be entered in the operator screen after loading the film.
Note: The tray must only be filled if not more than 10 film sheets
are remaining in the tray.
Note: If mammography film is used, both trays of the printer
must be loaded with mammography film.
Note: The information on the display of the printer is not visible,
unless the top door and middle door are opened. Filling the tray
of the film printer can be performed by opening only the bottom
door.
Drystar Kiosk Operator Manual | Operation | 43
0401B EN 20211008 1002