Update The Film Count - AGFA Drystar Kiosk 5370/100 Operator's Manual

Update the film count

1. Enter the operator screen.
2. Enter the number of extra film sheets that are in the tray, not counting the
new pack.
The film quantity value is the number of extra sheets in the tray, on top of
the new pack. If the tray was empty when loading the new pack, leave the
value 0.
• Push the + button to increase the value for the applicable film size
• Push the - button to decrease the value for the applicable film size
The number of extra film sheets must not be higher than 10.
3. Press the button to return to the welcome screen.
Figure 11: Return to the welcome screen
Related Links
Entering the operator screen using a barcode
Entering the operator screen using a password
Drystar Kiosk Operator Manual | Operation | 51
on page 33
on page 34
0401B EN 20211008 1002