Table of Contents
Advertisement
Film loading procedure
1. Open the empty input tray.
2. The printer is ready to receive a new film when the following message
appears:
3. Remove the white cover sheet.
4. Take film pack, and open it.
Drystar Kiosk Operator Manual | Operation | 45
WARNING:
To avoid possible film jams, make sure to open input tray all
the way.
Note: Verify that the film type on the film pack corresponds
with the sticker on the tray! If you do use an other film type,
you are advised to change the label on the tray.
0401B EN 20211008 1002
Advertisement
Table of Contents
