Blaupunkt 400 Series User Manual page 31

14. Bluetooth® hands-free system
The Bluetooth® functionality allows you to pair cell phones
and media players with your car radio. When you pair your cell
phone with the car radio, you can make phone calls using the
built-in hands-free function. You can access the dial lists and
phonebook of the paired cell phone transferred to the radio.
Note: At the time of launch, extensive testing of Bluetooth®
functionality was conducted with various phones and media
players to ensure the highest possible compatibility. However,
some features may be limited or not work at all depending on
the device in use. In case of such problems, please check if an
update is available for your device or radio.
Note: Access to the numbers of a connected phone is
device-specific and may not be supported depending on the
phone you are using. Make sure that access to the phonebook
is allowed on the phone.
Note: Up to 5 Bluetooth® devices can be paired, but they
cannot be connected simultaneously. Before connecting
another Bluetooth® device, disconnect the already connected
device.
Bluetooth® connection
Turn the device on, open the Bluetooth® settings on the
Bluetooth® device, search for available devices, pair them as
instructed in the Bluetooth® device's manual. After a successful
pairing, the car sound system displays PAIRED/CONNECTED,
and a small Bluetooth® symbol.
Note: Confirm any messages prompted on your phone
immediately, otherwise some features may be limited,
unavailable, or pairing may not work.
Note: The pairing is required only once, after which the
devices will reconnect automatically.
Note: Before using the phonebook, it must be loaded with
the DOWNLOAD P-BOOK function. If the phonebook is not
available later, the memory may be occupied by another
phone's data. In this case, you must first delete the phonebook
with the DELETE T-BOOK option. Also, the phonebook access
may not have been activated on your phone or there may be a
compatibility issue.
Incoming calls
An incoming call is indicated by a ringing tone and a message
on the device display.
You can take or reject the call using the phone buttons.
Outgoing calls
You can make a call in several ways from the BLUETOOTH
menu:
TB SEARCH:
Use the right button/knob to select the first letter, and then to
select the phonebook entry transferred from your phone.
PHONEBOOK:
Use the right button/knob to select a phonebook entry
transferred from your phone.
DIAL NEW NUMBER:
The number to be dialled can be entered using the right
button/knob. Select the desired digit by turning the right
button/knob, confirm the digit by briefly pressing the right
button/knob, or delete the last digit by pressing and holding
the right button/knob.
Press the ANSWER CALL/DIAL button to dial the number after
it has been fully entered.
Storing a phone number/Dialling a stored number
A manually entered number (see "DIAL NEW NUMBER" above)
can be stored by long pressing one of the memory buttons (1-
5). After storing the number, you can enter a name, then long
press the corresponding memory button again to save. If
saving the name is not completed, only the number will be
saved.
You can dial the number by pressing the ANSWER CALL/DIAL
button and then briefly pressing the corresponding memory
button. The number is then dialled with the ANSWER
CALL/DIAL key.
Note: The numbers stored are available on all connected
phones.
Secondary function of the "Answer call" soft key
The "Answer call" button can be assigned in the menu to a
desired function to start it without having to call up the
Bluetooth menu. The selected function can be activated by
long pressing the ANSWER CALL/DIAL button. Possible
options:
VOICEDIAL, PB SEARCH, PHONEBOOK, DIAL NEW NUMBER. See
"SETTINGS".
Note: Voice dialling/recognition is performed/processed by
the voice assistant on the connected phone, not by the radio
receiver.