Blaupunkt 400 Series User Manual page 21

2. Controls – remote control (optional)
The device can be operated with a remote control sensor built into the front of the main unit. This is possible with a remote control that
is available as an accessory to the device, or with older Blaupunkt remote controls (RC-08, RC-09, RC-10, RC-10H, RC-12H).
① On/Off button.
Note: The device can only be turned on with the remote
control when the ignition is on. This function increases the
standby current draw of the device and cannot be used
② Volume/mute buttons. without the ignition switch on to protect the vehicle battery.
③ Multifunction buttons: Control source-specific functions.
④ SRC (source) button:
Audio source selection: toggle between the available audio
sources one by one. Some sources can be deactivated, see also
"SETTINGS".
⑤ DIS button: Switches over the display
⑥ MENU button: Enters the menu
⑦ Station memory buttons:
Selecting a station or the secondary function such as
pause/repeat/shuffle playback, depending on the source
⑧ Telephone keys: selected
Answers and ends calls.