Advertisement
CM-336 BATTERY OPERATED ACTIVE INFRA-RED "HANDS-FREE" SWITCHES
I NS TA L L AT IO N I NST RUCT I ONS
5. SYSTEM INSPECTION INSTRUCTIONS
After the Installation and operational check of the system:
1. Place warning label on the door (as per ANSI A156.10 or
A156.19 guidelines). This will advise the person entering the
swing side zone that the door will move.
2. Instruct the owner on door system operation and how to
test it. This should be checked on a daily basis.
3. Instruct the owner on what to do if the door or any of its
components become damaged.
4. Strongly recommend to the owner that the complete entry
be inspected twice a year as part of the service agreement.
6. TECHNICAL DATA
No. of IR Sensors
(1)
Batteries
(2) 'AA' Alkaline (Supplied)
(Supplied)
Estimated Battery
2 Years (Based on 100 Operations/Day)
Life
Standard
1"- 12" (25.4mm - 304mm)
Operating Range
Factory Set to 6" (152mm)
Operating Mode
Momentary
Request to Exit (to trigger the relay remotely or
Inputs
from the other side of the door)
Built-in 915Mhz. Spread Spectrum
Wireless Output
Wireless Transmitter
Opening New Doors to
Innovation, Quality and Support!
Page 4 of 4
0'
Call: 1.877.226.3369 / 905.366.3377
Visit: www.camdencontrols.com
1"
(25.4mm)
1'
2'
3'
Diagram 4
Adjustable Range Settings
File: CM-336_Manual.indd
Revised: 06/27/22
Part No: 40-82B311
12"
(304mm)
Advertisement
