Filling Up The Internal Refrigerant Container - Dometic Waeco AirCon Service KSS Pingo R134a Operating Manual

Initial start-up
8.9

Filling up the internal refrigerant container

When the A/C service unit is started for the first time, the internal refriger-
ant container must be filled from an external refrigerant tank with at least
5000 g of refrigerant.
I
NOTE
Note the instructions on the refrigerant vessels.
The current supply quantities are displayed in the standby menu.
There are three different types of refrigerant vessel available:
 Refrigerant bottles without rising pipe:
These refrigerant bottles have one connection.
When filling the A/C service unit, the connection must be on the
bottom (turn the bottle upside down).
 Refrigerant bottles with rising pipe:
These refrigerant bottles have one connection.
When filling the A/C service unit, the connection must be at the top
(place the bottle upright).
 Refrigerant bottles with rising pipe:
These refrigerant bottles have two connections. To top up the A/C
service unit, use the connection marked with L (= liquid).
When filling the A/C service unit, the connection must be at the top
(place the bottle upright).
1. In the basic menu, use the cursor keys  or  to select "Other
selections":
2. Press ENTER to confirm.
3. Use the cursor keys  or  to select "Int. vessel filling":
4. Press ENTER to confirm.
86
Short selection
Free selection
Other selections
ENTER-OK
Int. vessel filling
Flushing
Reset scales.
Service
Pingo
EN