Initial Start-Up; Setting Up And Switching On - Dometic Waeco AirCon Service KSS Pingo R134a Operating Manual

Initial start-up

8 Initial start-up
8.1

Setting up and switching on

1. Wheel the A/C service unit to the workplace and lock the front
wheels (9).
I
NOTE
During operation, the device must be on a horizontal, flat surface so that
measurements can be made correctly.
2. Connect the A/C service unit to the mains.
3. To switch it on, set the main switch (20) to I.
The software version number appears in the display (6) for several
seconds:
"SW": Software status
"DB": Database
"SN": Series number
✔ The A/C service unit then runs a software test.
✔ When the start-up procedure is complete, the A/C service unit
displays the following:
80
Pingo
SW
DB
SN
Software test.
Please wait
Refrigerant
PAG oil
UV tracer
11:56:35
PM2k0071
lhd10028
000020
g. 4820
ml 375
ml 313
10/03/20
Pingo
EN