Advertisement
Factory Test & Alignment Specification For MS08EP-LA Series (V1.0)
YPbPr ADC Status
5-Shop init submenu
Item
Shop Init
6-NVM Reset submenu
Item
Reset
ALL
7-Preset Factory Channel submenu-----NC
Item
Preset Factory
Channel
8-Power On Mode submenu
Item
Power
On Mode
9-USB UPDATE submenu
Item
USB
UPDATE
B Gain
R Offset
G Offset
B Offset
White Balance Init
Sub-item
Sub-item
Sub-item
Sub-item
Sub-item
Main Upgrade
MEMC Upgrade
HDCP Uprade
Page 13 of 18
000..255
B White balance (-127..+128 for gain)
000..255
R Gray balance (-127..+128 for offset)
000..255
G Gray balance (-127..+128 for offset)
000..255
B Gray balance (-127..+128 for offset)
Press "OK" key to initial the preset RGB
DO
Gain/Offset value
NG
Value
Clear date of NVM in user menu, include
the value related installation, and Clear
DO
date of factory menu except the item of
Balance and sound ,set to default value
Value
Clear NVM values ， and set to default
DO
value
Value
Preset the channel table of factory. To
preset the channel table of certain factory,
firstly choose the corresponding factory
HZ/CD/NM/W
name, then press OK button of remote
X/POLAND
control and wait until the disappearance of
Factory Menu.
Value
ON: The set will power on after switching
on power
ON/LAST/STB
STB: Force TV to start in standby
Last: Force TV to start from last power
status
Value
Upgrade software
Upgrade MEMC
Upgrade HDCP
Note
Note
Note
Note
Note
Advertisement
