Page 2
WARNING: DO NOT LEAVE FIRE PIT UNATTENDED WHEN IN USE • This product is intended for use on non-flammable surfaces only. • Do not use on fabric, carpets, rugs, or wood and outdoor decks. • Do not use this product near a side wall. FUEL HOSE •...
NOTICE Please retain these instructions for future reference. • For outdoor use only; do not use in a building, garage, or any other enclosed area. • Fire pit operates at reduced e ciency in temperatures below 40°F. • Only use this appliance on a hard and level surface such as concrete or rock. •...
PROPANE TANK WARNINGS • Make sure to organize fuel hose to prevent accidental tripping. • Only use standard 20-pound propane tanks. • Maximum gas supply pressure is 250 PSI. • Do not fill tank more than 80% of its capacity. •...
Page 5
PARTS REAR PANEL RIGHT SIDE PANEL FRONT PANEL 1 PC 1 PC 1 PC DOOR TANK HOLDER/BASE CONTROL KNOB 1 PC 1 PC 1 PC TABLE LID TABLE TOP WITH PVC COVER BURNER 1 PC 1 PC 1 PC LAVA ROCKS 1 PC...
PRODUCT ASSEMBLY Attach the part B & C right legs to the part E right side panel with four part 1 screws and four part 2 washers. Locate the part A left leg panel, then attach the part F & D front and rear panel with four part 1 screws and four part 2 washers.
Page 7
PRODUCT ASSEMBLY Insert the bottom of the part G door in the part A left leg panel, then secure the top of the door with one part 3 screw. Flip the assembly, then attach the part K table top to the part A, B, and C legs with four part 1 screws and four part 2 washers.
Page 8
PRODUCT ASSEMBLY Place the part J table lid onto the table top and place the part I control knob onto the control panel. Install the propane tank (see Install propane tank section) then add the lava rocks to the fire bowl. NOTE: Do not cover the burner valves with fire rocks to ensure proper flow.
Page 9
INSTALLING PROPANE TANK NOTE: Only use standard 20-pound propane tanks. Open the door and make sure the release valve on the tank is firmly screwed shut. Attach the preassembled regulator from the table top (B) to the cylinder valve by turning the regulator coupling nut clockwise.
INSTALLING BATTERY Unscrew igniter button. Insert two AA battery with the positive side facing outwards. Replace igniter button. NOTE: If the burner is not lighting, you may need to replace the battery in the igniter. LIGHTING Check that the control knob is in the "OFF" position. Connect a propane cylinder and open the gas supply line.
STORAGE • Allow fire pit to cool 10 minutes before storage. • Disconnect propane tank when putting fire pit in storage. Do not store propane tank in the vicinity of the fire pit. • Do not store propane tank in temperatures over 120°F. •...
HELP CENTER Question about your product? We're here to help. Visit us at: help.bestchoiceproducts.com CHAT Chat Support Product Inquiry Orders FAQ Product Assembly Returns & Refunds PRODUCT WARRANTY INFORMATION All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included.