Net Series: Selected Front Panel Settings; Front Panel Password; Tcp/Ip Configuration - Leightronix NET-EC Installation Quick Manual

NET SERIES: SELECTED FRONT PANEL SETTINGS

ACTION

Front Panel Password

•
Enter password to access
event controller and
display "MAIN MENU."

TCP/IP Configuration

•
Enter IP address, subnet
mask, and, optionally,
gateway address.
Page 6 of 7
STEPS
1. From any status screen, press "→" to
display password entry screen.
2. Press "→" 5 times to enter the factory-
default password and display the
"MAIN MENU" screen.
1. From the "MAIN MENU" screen, press
"↑" or "↓" to proceed to "TCP/IP
Configuration."
2. Press "→" to select "TCP/IP
Configuration."
3. Press "→" to select "Edit IP Address."
4. Press "→" or "←" to position the
underscore under the editable fields
and press "↑" or "↓" to edit the values.
5. Press "→" to enter next screen.
6. Either press "→" again to save your
changes or "←" to abort changes.
7. Press "↑" to proceed to "Edit Subnet
Mask."
8. Press "→" to select "Edit Subnet
Mask."
9. Press "→" or "←" to position the
underscore under the editable fields
and press "↑" or "↓" to edit the values.
10. Press "→" to enter next screen.
CORRESPONDING SCREEN DISPLAY
Use arrow keys to enter
Password:*****
MAIN MENU
TCP/IP Configuration
IP CONFIG MENU
Edit IP Address
Enter new IP address
0. 0. 0.
Press ~ to confirm
IP address.
IP CONFIG MENU
Edit IP Address
IP CONFIG MENU
Edit Subnet Mask
Enter new Subnet Mask
255.255.255. 0
Use `/ˆ
~
Use `/ˆ
~
0
Use `/ˆ
~
Use `/ˆ
~
~
2007-09-10