Table of Contents
Related Manuals for Onyx DX20
Summary of Contents for Onyx DX20
- Page 1 BATTERY AUTOSCRUBBER OPERATOR MANUAL DX20 / DX20T BATTERY AUTOSCRUBBER This Guide provides necessary instructions on machine operation and maintenance. Before operation or use of this machine, please carefully read and understand this Guide.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Parts Ordering 12703 Commerce Station Dr • Suite 200 Warranty Claims Huntersville, NC 28078 Technical Support 704.827.9368 Protect the Environment Intended Use Website: https://www.onyxsolutions.store/ Uncrating Maching No further notice will be given for possible change of specification and parts. Safety Instructions Machine Components Machine Information:... -
Page 3: Parts Ordering
This machine is not intended for cleaning carpets or Machine IPL’s can be found at the top of the SHOP page of the ONYX website. Before matching parts sanding wood floors. Use only recommended pads/brushes and commercially available floor cleaning or accessories, please firstly determine your machine model and serial number. - Page 4 SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS FOR SAFETY: • Do not use incompatible battery chargers as this may damage battery packs and potentially cause a 1. Do not operate machine: fire hazard. • Inspect charger cord regularly for damage. • Unless trained and authorized. •...
-
Page 5: Machine Components
MACHINE COMPONENTS & SPECS MACHINE UNPACKING Carefully check machine for signs of damage. Report damages at once to carrier. To uncrate the machine, remove straps, wheel blocks and shipping brackets. Using the supplied ramp carefully back the machine off the pallet. Make sure scrub head is in the raised position. ATTENTION: Do not remove machine from pallet without using ramp, machine damage may occur. -
Page 6: Machine Maintenance
MACHINE MAINTENANCE TROUBLE SHOOTING GUIDE Follow the daily, weekly and monthly maintenance procedures to keep the machine in good condition. Problem Reason Solution WARNING: Electric shock hazard. Please firstly disconnect the battery wiring before maintaining Charge the battery The battery has no power the machine. -
Page 7: Wiring Diagram/Schematic
PR = Purple PK = Pink OG = Orange CY = Cyan Note: Colors may Vary Link to Wiring Schematic PDF file on ONYX Website Support Page: Link to Wiring Schematic PDF file on ONYX Website Support Page: https://www.onyxsolutions.store/support https://www.onyxsolutions.store/support... - Page 8 onyxsolutions.com...