Onyx DX20 Operator's Manual

Onyx DX20 Operator's Manual

Automatic floor scrubber
Hide thumbs Also See for DX20:

Advertisement

AUTOMATIC FLOOR SCRUBBER
OPERATOR MANUAL
081320 Rev. 1

Advertisement

Table of Contents
loading

Summary of Contents for Onyx DX20

  • Page 1 AUTOMATIC FLOOR SCRUBBER OPERATOR MANUAL 081320 Rev. 1...
  • Page 2: Intended Use

    Report damages at once to carrier. To uncrate the machine, remove straps, wheel blocks and shipping brackets. Using the supplied ONYX Systems LLC ramp carefully back the machine off the pallet. 12703 Commerce Station Drive Make sure scrub head is in the raised position.
  • Page 3: Safety Instructions

    ______________________________________________________________________________________ ______________________________________________________________________________________ SAFETY INSTRUCTIONS FOR SAFETY: The following warning precautions are used 1. Do not operate machine: throughout this manual as indicated in their • Unless trained and authorized. description: • Unless operator manual is read and understood. • Unless mentally and physically capable WARNING: To warn of hazards or unsafe of following machine instructions.
  • Page 4 ______________________________________________________________________________________ 6. When loading/unloading machine onto/off FOR SAFETY (cont.): truck or trailer: • Drain tanks before loading machine. 4. Before leaving or servicing machine: • Use a ramp, truck or trailer that can • Stop on level surface. support the machine weight and •...
  • Page 5: Safety Symbols

    ______________________________________________________________________________________ SAFETY SYMBOLS ______________________________________________________________________________________ These following safety symbols appear on the machine and in this manual to alert the operator of potential safety hazards. Read them carefully and understand their meaning. Replace labels if they are missing or become damaged or illegible. DANGER The signal word DANGER indicates a hazardous situation which, if not avoided according to the instruction found in this Operator Manual or on your machine, will result in death or serious bodily injury.
  • Page 6: Machine Specifications

    ______________________________________________________________________________________ MACHINE SPECIFICATIONS ______________________________________________________________________________________ SPECIFICATION DX20 DX26 DX34 Voltage 24 Volt 24 Volt 24 Volt Battery Capacity 100 Ah 200 Ah 200 Ah Cleaning Width 20” 26” 34” Squeegee Width 30” 42” 44” Cleaning Efficiency 24,000 sqft/hr 28,000 sqft/hr 34,000 sqft/hr...
  • Page 7: Machine Operation

    ______________________________________________________________________________________ MACHINE OPERATION ______________________________________________________________________________________ Machine Operation For safety: Please do not operate this machine before reading and understanding the operator manual. Warning: Fire or explosion hazard. Do not operate the machine close to or in the place where there is flammable liquid, air or dust.
  • Page 8: Machine Maintenance

    ______________________________________________________________________________________ MACHINE MAINTENANCE ______________________________________________________________________________________ Follow the daily, weekly and monthly maintenance procedures to keep the machine in good condition. Warning: Electric shock hazard. Please firstly disconnect the battery wring before maintaining the machine. DAILY MAINTENANCE: Drain and clean the wastewater tank. Dismantle and flush the floating filter screen in the wastewater tank.
  • Page 9: Troubleshooting

    ______________________________________________________________________________________ TROUBLESHOOTING ______________________________________________________________________________________ PROBLEM REASON SOLUTION The machine cannot be operated The battery has no power Charge the battery The battery fails Replace the battery The battery wiring is loose Fasten the battery wiring The main fuse blows out Replace the fuse The brush motor doesn’t work The brush head is off ground Lower the brush head The battery meter is locked...

This manual is also suitable for:

Dx26Dx34

Table of Contents