Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Onyx RX-34
Summary of Contents for Onyx RX-34
- Page 1 RIDE-ON FLOOR SCRUBBER OPERATOR MANUAL RX-34 RIDE-ON 34” DUAL HEAD / BATTERY SCRUBBER This Guide provides necessary instructions on machine operation and maintenance. Before operation or use of this machine, please carefully read and understand this Guide.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Parts Ordering 12703 Commerce Station Dr • Suite 200 Warranty Claims Huntersville, NC 28078 Technical Support 704.827.9368 Protect the Environment Safety Precautions Website: https://www.onyxsolutions.com General Information No further notice will be given for possible change of specification and parts. Technical Perameters Control System 9-12... -
Page 3: Parts Ordering
Preliminary information Machine IPL’s can be found at the top of the SHOP page of the ONYX website. Before matching parts The following notation is to arouse the reader / user note, to enable the machine used or accessories, please firstly determine your machine model and serial number. -
Page 4: General Information
GENERAL INFORMATION GENERAL INFORMATION ACCESSORIES Squeegee Unit RX-34 When you need replace parts, only use original accessories by manufacturers. To avoid more serious damage to the machine and make the machine perform better, please replace spare parts on time. Squeegee type... - Page 5 GENERAL INFORMATION GENERAL INFORMATION Battery Unit RX-34 Apparatus RX-34 Battery quantity & capacity n⁰-V-Ah 1-36-320 Water tank warning light Battery size (L x W x H) 760X10X460 Low water tank warning light Water in the battery type Distilled Water Battery warning light...
-
Page 6: Control System
CONTROL SYSTEM CONTROL SYSTEM 1. The brake pedal / parking brake hands lever. Pedal 1 is the control of the machine’s pedal travel or work Brake lever 2 lock pedal 1 and control the machine parking and Brake. (See the “brake”... -
Page 7: Common Safety Guide
CONTROL SYSTEM COMMON SAFETY GUIDE In this manual, the machine described in line with EC standards and on the machine with a number 98/37/EEC (machinery standards). Person in charge of the machine must comply with EEC directives 10. Clean water tank empty warning light and local regulation of the working environment to ensure the operation of machinery healthy and safe. -
Page 8: Use Of Scrubber-Dryer
USE OF SCRUBBER-DRYER PROCESS OF CLEANING Necessary prevention The process of using the scrubber machine is very simple. Experience can help you choose the most suit- 1, The machine must be used only by competent and reliable personnel. able cleaning brush and cleaning detergent, to make decision when to use cleaning and drying processes 2, when the machine is not in use, unplug the start key , and put hand brakes on to improve the cleaning effect. -
Page 9: Machine Maintenance
CHOOSING THE RIGHT DETERGENT MACHINE MAINTENANCE Select detergent WARNING: Before replacing brush, pull start key on the panel to ensure that the motor will To obtain good cleaning results, make sure to use the appropriate detergent. If necessary, ask the supplier not accidentally start. -
Page 10: Transmission
READY TO USE THE MACHINE SUCTION HEAD’S RUBBER BLADE In order to achieve excellent water absorption effect, Rubber blade should maintain its normal operation Suction head above the ground water height must be adjusted to the appropriate height of plywood and and replacement work to prevent the destruction of ground loss. -
Page 11: Driving Operation
DRIVING OPERATION SYSTEM BRAKING SYSTEM The main driving force generated by wheel 2 spread to wheel 3, and through the driving wheel 3 Imple- Brake system allows washing cars stop in the movement and remain stationary, but also make the vehicle menting the front-wheel drive. -
Page 12: Suction Motor
SUCTION MOTOR BATTERY Absorbent motor sewage drain fluid achieved by roller touching the ground. Distilled water filling Button 4 (Figure 3) is water motor’s control switch. The motor and filter must be checked each day and clean the filter in time. After charge, fill distilled water to the battery until it is higher than the top of the electrode plate 6mm, Check the motor and water filter, follow these steps: Remove the front panel touch switches and open mo- battery initial use, water must be added after each charge. -
Page 13: Battery Charger Connection
BATTERY CHARGER CONNECTION BATTERY Steps to replace batteries is as follows: Each Interval 1. Remove the steering wheel 2. Remove Seat Perform regular maintenance procedures 125 200 500 1500 3. Remove the strap Clean repair water tank clean Vacuum cleaner motor filter Check the filter tank clean the water tank filters Check the vacuum pipe and suction head... - Page 14 (Drive S and Jumbo series, this will be displayed through empty the water tank shut down or start the instrument panel 72 the alarm code) Link to Wiring Schematic PDF file on ONYX Website Support Page: www.onyxsolutions.com/productsupport Difficulty moving the Brake is pressed...
- Page 15 onyxsolutions.com...