Maintenance Method
■Maintenance of Ultrasuede Shift Boot
Regular cleaning about once a month is recommended.
Wipe the entire Shift Boot with a clean cloth soaked in lukewarm water of about 40℃
and squeezed firmly.
※Ultrasuede is a registered trademark of Toray Industries, Inc.
● Cleaning of dirt
If you spill the liquid, lightly apply tissue paper to absorb it. If the dirt cannot be removed,
follow the procedure below.
① Lightly soak a cloth in a solution diluted with a neutral detergent to a concentration of
5% to 10%, and squeeze it tightly, then wipe the Shift Boot with the cloth by sliding from
top to bottom while pressing the Shift Boot down. (See figure below).
Wiping direction
② Lightly soak a soft cloth in lukewarm water of approx. 40℃, squeeze it tightly, and wipe
the Shift Boot with the cloth by sliding from top to bottom while pressing the Shift Boot
down. Rinse the cloth with lukewarm water and repeat this procedure 3 times to remove
the mild detergent.
Revision history
△
00
Newly Established
※
Wiping direction
Content
3
Issue Date
2022.3.25
Need help?
Do you have a question about the Ultrasuede Shift Boot (WRX RED) and is the answer not in the manual?