Appendix 3: Network Connection - TCL 55D1620 Manual

Factory Test & Alignment Specification For MT56 Series (V1.0)

Appendix 3: Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a
wired or wireless connection.
Connect to a wired network
Attach the TV set to your LAN using cable in three ways:

Connecting the LAN port on the TV to an external modem using a Cat 5 cable.

Connecting the LAN port on the TV to an IP Sharer which is connected to an external modem. Use
Cat 5 cable for the connection.

Depending on how your network is configured, you may be able to attach the TV to your LAN by
connecting the LAN port on your TV directly to a network wall outlet using a network cable. Note that
the wall outlet is attached to a modem or router anywhere in your house.
Select Home→ Settings→ Network → Ethernet Settings→IP Settings, then the TV will obtain IP
address Automatic configuration. In addition, you can set the IP address and password manually.
Connecting to a wireless network
To connect the TV set to your network wirelessly, you need a wireless router or modem and a Wireless
LAN Adapter.
If the TV set is equiped with an internal WiFi module, select Home→ Settings→ Network→ Wireless
Settings, then turn on Wireless Switch, select a wireless network and press OK to connect.
If you want to connect the TV set to a wireless network by a Wireless High Gain USB Adapter (USB
dongle), select Home→ Settings→ Network→ Wireless Settings, then turn on Wireless Switch and
External WiFi, and select a wireless network and press OK to connect.
17