Page 1
PRODUCT SPECIFICATION RELEASE Model: 55D1620/MT5655-LA Version:1.0 Issued On: 2016-06-07 Basic Information Media Format LCD Smart TV Product Type Music MP3, AC3, HE-AAC, LPCM MT56-LA(MT56B.01) Chassis Picture JPEG, PNG, BMP, MPO Quad core CPU ARM CA7,920MHz MPEG2, MPEG4, H.264,Motion• JPEG Video...
Page 2
Essential Accessories (Default) Pre-Installed Application List Operation Manual English (Default) NetFlix Remote Control RC311 Youtube Integrated Packaging Base Stand Golive3.0 Browser AC power cord 1 pcs Crackle icflix Optional Accessories Foxxum Wall Mount WMB333 Deezer WI-FI Dailymotion WeatherNation(Argentina&Mexico) Babbidiboo(Brazil),Hellokids(others) Batteries 2 pcs Others Wireless Display...
Page 3
Factory Test & Alignment Specification For MT56 Series (V1.0) World-Wide R&D FPD CENTER Factory Test & Alignment Specification V1.0 ----MT56 FENG LIU PREPARED BY : DATE : 2015-02-13 APPROVED BY: DATE :...
Factory Test & Alignment Specification For MT56 Series (V1.0) Content 1. General Description ..........................3 2. Factory Menu ............................5 2.1 Accessing Way ........................... 5 2.2 Factory Menu ............................6 2.3 White Balance Menu .......................... 7 3. Design Menu ............................7 3.1 Accessing Way ...........................
Factory Test & Alignment Specification For MT56 Series (V1.0) 1. General Description The information contained in this document is proprietary to TCL SZ FPD lab and shall not be disclosed by the recipient to the third person without the written permission of the team leader or GM of R&D.
Page 6
Factory Test & Alignment Specification For MT56 Series (V1.0) Audio Out RCA*2 USB2.0*2 (Video, audio and picture) Input Shares with HDMI 1 & Output PCMCIA SPDIF output RCA*1 NETWORK RJ45 Socket Internet Functions WIFI Others Serial connector Multiplexing VGA UF01 Main program (Support online upgrade)
Factory Test & Alignment Specification For MT56 Series (V1.0) 2. Factory Menu Factory Menu is mainly used for factory production and satisfies various demands of customers. It covers all indispensable functions during manufacture such as Warm up, White Balance, Shop, NVM Reset, Power on mode, USB Clone etc.
Factory Test & Alignment Specification For MT56 Series (V1.0) MID 2.2 Factory Menu Factory Menu Default Description Name Factory Menu shortcut button switch Factory hotkey The item must be disabled (OFF) after production Aging mode, mainly used for factory aging. Press “Menu”...
Factory Test & Alignment Specification For MT56 Series (V1.0) 2.3 White Balance Menu Press the button on remote control to select certain item and OK to adjust White Balance. White Balance Name Default Description Source Press RCU left/right key to change the TV source. Color normal Select color temperature you intend to adjust Three groups of color...
Factory Test & Alignment Specification For MT56 Series (V1.0) 3.1 Accessing Way a. When the Design mode hotkey item is disabled(OFF), press Menu button of remote control, then select Settings/ Picture, make sure the cursor stop on Contrast item submenu, press 1, 9, 5, 0 consecutively. b.
Factory Test & Alignment Specification For MT56 Series (V1.0) 3.3 Other Menu The Other Menu contains some TV basic information, with which we can check the TV setting before production. Other Menu Description Name Default Switch the TV source into test pattern, and restarting TV is the only way to excit. TestPattern >...
Factory Test & Alignment Specification For MT56 Series (V1.0) 3.5 Param Setting Menu Param Setting menu contains Sound Setting, Picture Curve, Picture Setting, SSC, DBC, CI Card, Overscan, WIFI CHECK and USB FILE. But it is exclusively used by R&D engineer, anyone else shouldn’t change the settings in the menu.
Factory Test & Alignment Specification For MT56 Series (V1.0) 4. Test & Alignment According to the requirement of order, we suggest take the below steps to finish the appropriate settings. Note: All tests and measurements mentioned hereafter have to be carried out at a normal mains voltage (100 ~ 240 VAC) ...
Factory Test & Alignment Specification For MT56 Series (V1.0) the ID. There are two methods to modify the ID: Change Project ID in Design Menu In case of “Design mode hotkey” is enabled, press “Back” button to enter Design Menu. To modify Project ID, you need to go through “Service menuProject ID”, then press Left or Right key to select suitable ID (Project name is dynamically refreshed).
Factory Test & Alignment Specification For MT56 Series (V1.0) 4.4 LAN/WLAN Test MAC Address Upgrade Upgrading MAC address needs to use the tool in factory and through serial command. The specific method is according to the operation of the factory guidance. DeviceID (DID) and UserID (UID) Purpose is to allow Other Network Download (OND) and further specific services over dedicated portal based on AP.
Appendix Appendix 1: Warm-up Test Following TCL standard and practices, it’s required minimum 15min of Warm-Up that can be considered as Burn-In. Additional aging for White Balance alignment is no more necessary due to consistent picture performance with cloning usage. This function is accessible by selecting “Factory menu Warm up”, pressing RCU “Right”...
Factory Test & Alignment Specification For MT56 Series (V1.0) Appendix 2: Software Upgrade How to upgrade Mboot Connect the computer and mainboard VGA port by a serial port tool. Serial connector definition: VGA/P303: Pin4: RXD VGA Pin11:TXD Open MTK “Mboot” software programming tool “Flash Tool”, and set serial port. ...
Page 18
Factory Test & Alignment Specification For MT56 Series (V1.0) How to upgrade FLASH Software 1. USB Upgrade Download the update file (generally named V8-MT56551-LF1VXXX.pkg) to the root directory of your USB device, and make sure there’s no other bin file named analogously. Then insert the USB device to USB interface of TV set.
Factory Test & Alignment Specification For MT56 Series (V1.0) Appendix 3: Network Connection You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection. Connect to a wired network Attach the TV set to your LAN using cable in three ways: ...
HuiZhou factory of TCL. Calibration of Color Temperature According to TCL standards, the color temperature and white reference coordinates of LCD like the following table: (This standard is based on CA-310 color temperature meter) chromaticity coordinate...
Page 22
DC_OUT DC_IN max 5A PANEL_VCC_12V Power ON 1510mA 1500mA 1500mA TPS56528 12V_IN 12V_OUT +12V PANEL DC_OUT 3V3SB SWITCH DC_IN max 500mA GPIO CORE_1V2 350mA U101 Max 3A Max 3A DC_IN DC_OUT VDD-CPU TPS560200 Max 6A U001 DC_IN DC_OUT CORE_1V2 POWER_ON UDB0 max 6A MP8765...
Page 23
0.1U DD-MM 0.6V SBU : AN_SY8291 FSW=800KHz TCLNO: DD-MM R051 ..... TCL Thomson Electronics Ltd. DD-MM B Building, TCL Tower, Nanhai Road Nanshan District, Shenzhen, Guangdong DD-MM DESIGNATION R052 Tel +86-755-3331xxxx Fax +86-755-3331xxxx DRAWN Index-Lab DATE NAME DESCRIPTION Last modif...
Page 24
C194 100U 0.1U DD-MM SBU : C196 0.1U DD-MM TCLNO: ..... TCL Thomson Electronics Ltd. DD-MM B Building, TCL Tower, Nanhai Road Nanshan District, Shenzhen, Guangdong DD-MM DESIGNATION Tel +86-755-3331xxxx Fax +86-755-3331xxxx DRAWN Index-Lab DATE NAME DESCRIPTION Last modif CHECKED PAGE: ...
Page 25
MINI AV CLOSE TO U001 Close to Connector R908 AV1_V_IN+ VGA JACK C907 0.047U 100R AV_GND AV_V C906 R907 AV1_V_IN- P902 CVBS AV_V C908 Close to Connector AV_L R909 AV_L AV1_L_IN C909 1U AV_R R910 AV1_R_IN AV_R C910 150P 150P C911 C912 AV AUDIO OUT...
Page 33
Trouble shooting diagram Terms: Terms: IR: Infrared Receiver RC: Remote Control IR logic: IR blink with RC action IR logic: IR blink with RC action LVDS: Low Voltage Differential Signal, output from processor and input for panel O/C: Open Cell, panel with source board BL: Back Light, light source for panel module g , g LB: LED (Light Emitting Diode) Bar, light source for BL module...
Page 34
1.No power No power LED, RC or Key can not turn on TV. Power LED no light/no change. No power LED, RC or Key can not turn on TV. Power LED no light/no change.
Page 35
2.No Display / Black Panel Back light is OK, sound is OK, but no picture.
Page 36
3.No back light Power LED logic OK, sound OK, but no picture(Different from No Display). Power LED logic OK, sound OK, but no picture(Different from No Display).
Page 37
4.No sound One or all signal source without sound. ll i...
Page 38
5.Signal source no function One or several source no function. One or several source no function.
Page 39
6.Abnormal Display OSD NG or picture NG. OSD NG or picture NG.
Page 40
7.No tuning channels DTV or ATV no Channels DTV or ATV no Channels...
Page 41
8.P mode on and burning mode Picture Factory mode on(flash words) changing Burning P mode on mode Press Return Press Menu/ Input/ key on remote Source switch on TV control key pad Appear factory menu on screen Quit burning mode Follow the alignment ...
Need help?
Do you have a question about the 55D1620 and is the answer not in the manual?
Questions and answers