Factory Menu - TCL 55D1620 Manual

Factory Test & Alignment Specification For MT56 Series (V1.0)
 MID

2.2 Factory Menu

Name
Factory hotkey
Warm up
White Balance
Shop
NVM Reset
Power On Mode
USB Clone
Preset Factory
Channel
DeviceID test
Other
ADC
SW NO. device info
Project Name device info
Date device info
Default
Factory Menu shortcut button switch
OFF
The item must be disabled (OFF) after production
Aging mode, mainly used for factory aging.
Press "Menu" key on keyboard to exit the burning mode.
OFF
See Appendix 1 "Warm-up Test"
White Balance Adjustment ( see details below)
..
It is crucial that the function is executed after production aim to clear information
> of production process, ensure user cannot access to Factory Menu after
executing the item.
Restore default value except White Balance, ADC data.
>
ON: the set will power on after switching on power.
STANDBY: the set will remain standby status after switching on power.
STANDBY LAST: the set will turn to the status in which it lies when last switching off.
If without requirement from certain customer, by default, the Setting should be
STANDBY
Select to choose the things you want to clone.
..
Preset the channel table of factory. To preset the channel table of certain factory,
.. first, choose the corresponding factory name. Then press OK button of remote
control and wait OK is displayed on the screen.
Test device ID.
DO
Project Information
Analog To Digital Converter
..
Version information of Main Software
Product model
Release date and time of main software
Factory Menu
Description
6