Operation Basics - Tascam Professional CD-RW900 Owner's Manual

Operation basics

1. Select the desired menu option
Press the key on the front panel or remote
MENU
control to call up the desired menu. The PLAY
option in the PLAY sub-menu will be shown on
the display at first.
Front panel operation: Rotate the
dial to select the desired menu option, then push
the dial to confirm.
Remote control operation: Use the
to cycle through the different menu options, then
press the key to confirm.
ENTER
The sub-menu option screen of the selected menu
will be displayed.
If the PLAY option is selected, the sub-menu option
shows up like this:
NOTE
Return to the menu option selection screen, press
the ESCAPE key on the front panel or the CLEAR
key on the remote control.
2. Select the desired sub-menu
Front panel operation: Rotate the
dial to select the desired sub-menu, then push the
dial to enter the selection.
Remote control operation: Use the
to select, then press the ENTER key.
The menu item screen of the selected sub-menu will
appear. If the sub-menu PLAY MODE is selected,
the menu item shows up like this:
NOTE
To return to the sub-menu option selection screen,
press the ESCAPE key on the front panel or the
CLEAR key on the remote control.
3. Setting the desired menu item or value
Front panel operation: Use the
dial to select the desired menu item or value.
Pushing the dial enters and exits menu mode.
Remote control operation: Use the
to select. Pressing the
exits menu mode.
NOTE
Some menu options exist for confirmation purposes
only, and the setting cannot be changed.
MULTI JOG
4. How to exit menu mode after setting (or
confirmation), during menu option display.
key As well as pushing the
SKIP
ing the
to exit menu mode.
NOTE
The selected menu mode remains after power is
turned off, except the TEXT menu.
MULTI JOG
key
SKIP
3−Menu operation 1-Introduction
key confirms and
ENTER
MULTI JOG
key, you can use the
ENTER
TASCAM CD-RW900
MULTI JOG
key
SKIP
dial or press-
key
MENU
1