2
RADAR FIELD
The size of the detection field varies according to the mounting height and parameter settings of
the sensor.
ANGLE
Tilt the antenna up to adjust the depth outward and down to adjust inward from the doorway.
WIDTH
Navigate to menu 2 of the LCD to choose the desired width shape – wide lobe or narrow lobe.
If using remote control, you can also press the RAD:Fieldsize button (
to select Wide shape or the minus sign (
To check the existing radar field size/shape, use the following sequence:
75.0034.03 ULTIMO 20220120
) to select Narrow shape.
x
x = number of flashes
Graphics are representations,
not default settings.
) and the plus sign (
1x = narrow
2x = wide
= corresponds to the field size
)
Page 9 of 20