BEA ULTIMO Manual page 7

READ BEFORE BEGINNING PROGRAMMING/SET-UP
DISPLAY DURING NORMAL FUNCTION
motion
FACTORY VALUE VS. SAVED VALUE
NAVIGATING IN MENUS
1) Push to enter the LCD menu.
= scroll
VALUE CHECK WITH REMOTE CONTROL
75.0034.03 ULTIMO 20220120
HOW TO USE THE LCD
negative display = active output
AIR
displayed value
=
factory value
2) Enter password, if necessary.
Password
Not during the first minute after
power-on of the sensor.
= select
Pressing a parameter symbol on your remote control displays the saved value
directly on the LCD screen. Do not unlock first.
3) Select language before entering the first LCD menu.
X X X X
Select Back to return to previous
menu or display.
Select More to go to next level:
- IR menu
- Radar menu
- Outputs & Diagnostics menu
To adjust contrast, push and turn
the gray button simultaneously.
During normal function only.
displayed value
=
saved value
Page 7 of 20