Adjusting The Bass And Treble; Bas/Tre - Sony MEX-1HD Operating Instructions Manual

Adjusting the equalizer curve
You can adjust and store the equalizer settings
for frequency and level.
1
Press (SOURCE) to select a source.
2
Press the L dial, then rotate the L dial
to select "EQ7."
3
Press the L dial.
4
Rotate the L dial to select the desired
equalizer curve, then press (F2)
(TUNE).
5
Press the L dial repeatedly to select
the desired frequency.
Each time you press the L dial, the frequency
changes as follows:
t t
62Hz 157Hz
t
2.5kHz 6.3kHz
6
Rotate the L dial to adjust the level.
The level is adjustable between
–10 to +10 steps.
7
Press (F3) (
).
The normal display appears.
To restore the default setting
Press (F2) (INIT) in step 5.
t t
396Hz 1.0kHz
t t
16kHz 62Hz

Adjusting the bass and treble

— BAS/TRE

SOURCE
L dial
1
Press (SOURCE) to select a source.
2
Press the L dial.
The sound list display appears.
3
Rotate the L dial to select "BAS" or
"TRE," then press the L dial.
4
Rotate the L dial to adjust the level.
The bass/treble level is adjustable between
–10 to +10 steps.
5
Press the L dial.
The normal display appears.
Note
If DSO is set to "On," or EQ7 is selected, the effects of
BASS and LOUD may be hard to be recognized.
47