Receiving The Stored Stations - Sony MEX-1HD Operating Instructions Manual
Audio library system
Hide thumbs
Also See for MEX-1HD:
- Operating instructions manual (148 pages) ,
- Service manual (124 pages) ,
- Supplementary manual (5 pages)
Table of Contents
Advertisement
Available languages
Available languages
Receiving the stored stations
R dial
SOURCE
MENU
F2
F3
FUNCTION
1
Press (SOURCE) repeatedly to select
“FM” or “AM.”
2
Rotate the R dial to select the desired
station.
Display items
Station name*
Frequency
Preset station
Radio
band
number
* Displayed only when a name is assigned. For details
on assigning a name, see “Labeling a radio station”
on page 26.
If preset tuning does not work (Local
mode)
The Automatic Tuning function may stop
frequently when there are many radio stations in
the area. If this happens, you can reduce the
sensitivity of the tuner so that only relatively
strong signals are tuned in.
1
During radio reception, press
(FUNCTION) repeatedly to display the
function menu “LOCAL.”
2
Press (F2) (LOCAL) to select “Local
On.”
To cancel the local mode
Press (F2) to select “Local Off” in step 2.
If FM stereo reception is poor
(Monaural mode)
1
During FM reception, press (MENU).
2
Rotate the R dial to select “Receive
Mode,” then press the R dial.
3
Rotate the R dial to select “Mono,”
then press the R dial.
4
Rotate the R dial to select “On,” then
press the R dial.
5
Press (F3) (
).
The normal reception display appears.
The sound improves, but becomes monaural.
To cancel the Monaural mode
Select “Off” in step 4.
Tip
If FM broadcasts are difficult to hear, set DSO to “Off”
(see “Setting the Dynamic Soundstage Organizer” on
page 46).
If interference occurs during FM
reception (IF Auto mode)
This unit will automatically narrow the reception
frequency to eliminate noise. In such cases, some
FM broadcasts may become monaural while in
the stereo reception mode. To always hear FM
broadcasts in stereo, you can change the IF Auto
setting and widen the frequency signal reception.
1
During FM reception, press (MENU).
2
Rotate the R dial to select “Receive
Mode,” then press the R dial.
3
Rotate the R dial to select “IF Switch,”
then press the R dial.
4
Rotate the R dial to select the desired
item, then press the R dial.
Item
Explanation
Wide
Maximizes signal reception and
improves sound quality.
Auto
Switches the mode
automatically.
5
Press (F3) (
).
The normal reception display appears.
Page 25
- Quick Links:
- Resetting the Unit
Hide quick links:
Advertisement
Chapters
Table of Contents
