Additional Information; Maintenance - Sony MEX-1HD Operating Instructions Manual

Audio library system
Hide thumbs Also See for MEX-1HD:
Table of Contents

Advertisement

Available languages

Available languages

Additional Information

Maintenance

Fuse replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.
Fuse (10 A)
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as this
could damage the unit.
58
Cleaning the connectors
The unit may not function properly if the
connectors between the unit and the front panel
are not clean. In order to prevent this, detach the
front panel (page 8) and clean the connectors
with a cotton swab dipped in alcohol. Do not
apply too much force. Otherwise, the connectors
may be damaged.
Fuse (10 A)
Notes
• For safety, turn off the ignition before cleaning the
connectors, and remove the key from the ignition switch.
• Never touch the connectors directly with your fingers
or with any metal device.
Cleaning the front panel display.
Wipe dust or dirt from the front panel surface
with the supplied cleaning cloth.
Main unit
Back of the front panel

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents