Connecting Auxiliary Audio Equipment - Sony MEX-1HD Operating Instructions Manual

Connecting auxiliary audio
equipment
You can connect auxiliary audio equipment to
this unit with the AUX IN connector.
SOURCE
Selecting auxiliary equipment
Press (SOURCE) repeatedly to select
"AUX."
Note
If "AUX" is not displayed when selecting the source,
set "AUX Skip" in "Setup" to "Off."
Adjusting the volume level
You can adjust the volume for each connected
audio equipment accordingly.
1
Press (MENU) while "AUX" is selected.
2
Rotate the R dial to select "Input
Level," then press the R dial.
3
Rotate the R dial to select the desired
volume level.
The volume level is adjustable in 1 dB steps
from –6 dB to +6 dB.
4
Press the R dial.
5
Press (MENU).
The normal display appears.
56
To deactivate "AUX" in the music
source display
1
Press (MENU), then rotate the R dial to
select "Setup," then press the R dial.
2
Rotate the R dial to select "AUX Skip,"
then press the R dial.
MENU
3
Rotate the R dial to select "On," then
press the R dial.
4
Press (MENU).
The normal display appears.
To cancel "AUX Skip"
R dial
Select "Off" in step 3.