Panta Rhei Hydro Wizard ECM 42 Operating Manual page 14

®
Hydro Wizard
2. Installation step:
•
Important notes:
•
•
ECM 42
In order to fix the pump, take the small magnet
and attach it to outside of the pane – on the
Putting the magnet directly on the magnet
support may lead to crushing of the hand and
may possibly damage the tank! Furthermore,
the outer single magnets are not intended for
use in water. Water may penetrate, which leads
to the corrosion (rusting) of the magnets.
Appropriate mounting material can be
purchased directly from Panta Rhei. Information
on this can be found on page 26 of this
operating manual. The dimensions can be
found in the dimension drawing on page 24.
The Hydro Wizard
axial forces. In addition, there are the inertia
forces of the moving water masses in the tank.
If you do not use Panta Rhei equipment for
mounting, please pay attention that the support,
on which the Hydro Wizard
safely absorb a force of approx. 20 N.
Operating manual
point where it meets the
magnet support of the
inside of the pane. For
attaching the outer
magnet, we recommend
you to put the magnet far
away from the magnet
support on the pane (1)
and then slide it carefully
towards the magnet
support (2).
®
itself generates very high
®
is assembled, can
9