Removing Engine Block - Echo CS-310 Service Manual

CS-310

8-5 Removing engine block

A
B
ENGINE
1. Remove cylinder cover, sprocket guard, brake
lever and starter assembly (Refer to "2-1 Disas-
sembling starter assembly").
2. Remove air fi lter, cleaner case and carburetor.
3. Remove fl ywheel (Refer to "3-10 Inspecting fl y-
D
wheel and key").
4. Remove clutch assembly and worm gear (Refer
to "5-1 Inspecting clutch parts").
5. Remove muffl er with muffl er gasket.
C
6. Remove two bolts (A) and remove ignition coil
(B).
7. Remove two bolts (C) of intake insulator (D).
8. Remove 4 bolts (E) from bottom of the unit.
9. Pull out engine block, together with intake insu-
lator (D).
E
55